AT-41000

Specifications:

Model Number :AT-41000

1KHz(EIA) with 0.5% THD

4Ω STEREO:1650W*4

8Ω STEREO:1000W*4

8Ω bridge mono:3300W*2

Performance:

Voltage Gain: 42.7/40.5/32

Total harmonic Distortion (THO) : ≤0.05%（＠ 8Q, 1kHz, 1/6 rated power

Inter-modulation Distortion [IMD) : ≤0.15%(@ 8 Q, 1KHz, 1/8 rated power

Power voltage : ~90~265V

Power Connector: Standard IEC connector

Output Grade (Technology Type): Class D

Frequency Response (at 1 Watt) : 1OHz-20KHz,+/-1 dB

Damping Factor : ≥600 [10Hz-400Hz, 8 ohm)

S/N Ratio (20Hz-20Khz,4 Ohms) : >106db

Crosstalk (1 KHz, 4ohm) :>40db

Input sensitivity : 0.775V,0dB

Input impedance(nominal) Power Delay : Balance 10K ohms, unbalanced 20K ohms

Slew Rate: 􀂔20v/ µ S

Connectors,Controls and Indicators

Input Connectors: XLR socket ( female)

Output connectors : SPEAKON

Front Panel Controls : Power on/off switch and Volume Control

Rear Panel Controls : Output mode switch for mono, stereo or bridge selection

LED Indicators: Three LED lights for every channel. Clip/-10dB,signal and Mono/bridge/Status lights in front panel.

Cooling system: Cooling fans with variable speed

Construction:

Protections: Protection against RF, on/off switching, short circuit, direct current, over load, low voltage &over-heat

Ventilation: Flow-through ventilation from front to back

Dimensions [WxHxD) : 483*44*230mm

Net Weight :7.1kg

Shipping Weight:7.7kg

Accessories: Operation manual 1pc. power cord plug 1pc